Thomas and Betts
MPN # 5304
3M™, 5304, Splice Kit, 3-Cable, Series: 5300, 0 to 1000 VAC, Shielded Cable, 250 to 500 kcmil Conductor, 0.67 to 1.05 in OD Insulation, 6.7 in Splice Length, 1 Conductors, Pigtail Connector, 90 to 130 deg C, EPDM Rubber, Black
3M™, 5304, Splice Kit, 3-Cable, Series: 5300, 0 to 1000 VAC, Shielded Cable, 250 to 500 kcmil Conductor, 0.67 to 1.05 in OD Insulation, 6.7 in Splice Length, 1 Conductors, Pigtail Connector, 90 to 130 deg C, EPDM Rubber, Black
- Fast and simple installation
- No torches or heat source required
- No special tools required to install splice
- Thick walls to resist puncture and abrasion damage
- High dielectric constant stress control included with 5/8 kV kits for shielded feeder cables for minimizing size and electrical stress
- Easy re-entry, can be used on cables with a rated operating temperature of 90 deg c and an emergency overload rating of 130 deg C, to splice (insulate and seal) motor lead connections for 1000 vac and less cables sized 16 AWG to 500 kcmil
- 5/8 kV shielded and non-shielded feeder cables sized 8 AWG to 500 KCMIL, polyethylene cable, cross-linked polyethylene cable (xlp), ethylene propylene rubber cable (epr), copper conductors
- 1-1/2 in maximum bolt length
- 1.7 in id lug cover
- 6.7 in lug cover length
- 1400 psi tensile strength
- 750% elongation
- 365 V/mil dielectric strength
- 1/case
- 250 kcmil to 500 kcmil feeder cable, 4/0 AWG to 500 kcmil motor lead conductor size
- Designed to use with copper compression, 1-hole lugs
- Slip-on lug cover is made of durable EPDM rubber
Specifications
- Cable TypeShielded
- ColorBlack
- Conductor Size250 to 500 kcmil
- Connector TypePigtail
- Insulation Size0.67 to 1.05 in OD
- MaterialEPDM Rubber
- Number of Conductors1
- Series5300
- Splice Length6.7 in
- Temperature Rating90 to 130 deg C
- Type3-Cable
- Voltage Rating0 to 1000 VAC