×

Hubbell
MPN # HBL5100R9W

Wiring Device-Kellems Pin and Sleeve Receptacle, 3-Phase Standard Service Single Flanged, 120/208Y VAC, 100 A, 10 hp, 4 Poles, 5 Wires, Industrial Grade, IP67 Enclosure, -40 to 75 deg C, Pressure Screw Terminal, Composite/Thermoplastic, Blue, 5.71 in H x 5.5 in W x 6.69 in D

$945.9028 / EA
Item Available for Backorder

Wiring Device-Kellems Pin and Sleeve Receptacle, 3-Phase Standard Service Single Flanged, 120/208Y VAC, 100 A, 10 hp, 4 Poles, 5 Wires, Industrial Grade, IP67 Enclosure, -40 to 75 deg C, Pressure Screw Terminal, Composite/Thermoplastic, Blue, 5.71 in H x 5.5 in W x 6.69 in D

  • Zytel® 101 nylon housing, mounting flange, stainless steel (17-1 type) arm spring, Rynite® SST35 cover and arm, nickel plated brass cover screw/rivet
  • Stainless steel (300 series) mounting screws, terminal screws, assembly screws, pin/sleeve spring and hinge spring
  • High impact thermoset contact carrier and retainer
  • Neoprene gasket
  • Polycarbonate rotating sealing disc, brass ground/phase sleeve and beryllium copper multi-contact insert with silver plating pin/sleeve spring
  • Dielectric withstand voltage of 3000 VAC minimum
  • 600 Vrms maximum working voltage
  • Certified for current interrupting at full rated current
  • Maximum 30 deg C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75% temperature rise
  • 10000 cycles mechanical, 6000 cycles electrical endurance
  • Terminals identified in accordance with North American and international conventions
  • Identification and ratings are a part of the external label and molded into the receptacle mount product identification
  • Every Hubbell non-metallic pin and sleeve product is designed to meet the international standard IEC 60309-1 and IEC 60309-2
  • Device standard calls out singly rated, non-interchangeable configuration for every voltage and type of service
  • Suitable for use on a circuit capable of delivering not more than 10000 RMS symmetrical amperes at the voltage rating of the receptacle short circuit withstand
  • All materials are UV stabilized UV resistance
  • 3 to 1/0 AWG wire

Specifications

  • Amperage Rating100 A
  • ColorBlue
  • Dimensions5.71 in H x 5.5 in W x 6.69 in D
  • EnclosureIP67
  • GradeIndustrial
  • Horsepower10 hp
  • MaterialComposite/Thermoplastic
  • Number of Poles4
  • Number of Wires5
  • Temperature Rating-40 to 75 deg C
  • Terminal TypePressure Screw
  • Type3-Phase Standard Service Single Flanged
  • Voltage Rating120/208Y VAC