CAD 49.57
I-Grips for Hubbell Insulgrip Plugs and Connectors. Strain relief devices control cable arc-of-bend and reduce high pull tensions on cordsets from wiring terminals. Fit all 2-, 3-, 4-, and 5-wire Hubbell Insulgrip plugs and connector bodies. Eye tabs fit under nylon cord clamp and screws slide through eyelet holes, securing grip in place. Made of high-strength, plastic-coated galvanized steel strand. Indoor use only. Strain-Relief Devices and Cable Support Grips. UL Listed (except 6C095) and CSA Certified.Note: Grip only; plug and connectors are not included. Note: Always use a Safety Factor in application. Never use grips at tensions up to listed breaking strength. Recommended Safety Factor of 10.
Additional Info:
I Grip Strain Relief Device, Cable Diameter Range 0.32-0.43in, Eye Length 1 1/4in, Eyelet Hole Diameter 0.203in, Mesh Length 4in, Fits Hubbell Plugs and Connectors
Additional Info:
I Grip Strain Relief Device, Cable Diameter Range 0.32-0.43in, Eye Length 1 1/4in, Eyelet Hole Diameter 0.203in, Mesh Length 4in, Fits Hubbell Plugs and Connectors
More Products from Hubbell
-
HBL2311SWCAD 10642
-
SS8CAD 195
-
HBL77CM74WOCAD 7594