GE Spec-Setter™ Safety Switch, Type TH Dust-Tight Fused Heavy Duty, 600 VAC, 125/250 VDC, 400 A, 50 hp, 125 hp, 350 hp, 3 ph, 50/60 Hz Frequency, 3 Pole, 4 Wires, 200 kA Short Circuit, Donut Handle Actuator, Class J/R Insulation, NEMA 1 Enclosure, 3/4-Point Welded Bracket Mounting, Line/Load Lug Terminal, 60 to 75 deg C, 22.9 in W x 8.3 in D x 53.9 in H Dimensions, Stainless Steel
GE Spec-Setter™ Safety Switch, Type TH Dust-Tight Fused Heavy Duty, 600 VAC, 125/250 VDC, 400 A, 50 hp, 125 hp, 350 hp, 3 ph, 50/60 Hz Frequency, 3 Pole, 4 Wires, 200 kA Short Circuit, Donut Handle Actuator, Class J/R Insulation, NEMA 1 Enclosure, 3/4-Point Welded Bracket Mounting, Line/Load Lug Terminal, 60 to 75 deg C, 22.9 in W x 8.3 in D x 53.9 in H Dimensions, Stainless Steel
- Bright red "donut" handle molded from rugged SE1 noryl thermoplastic is easy to see, easy to grip and ideal for hook stick operation, it accepts 3-padlocks in Off position
- Coin-proof, defeatable dual interlocks meet all safety inspection requirements
- Wide, unobstructed gutter and removable interior make wire pulling and lug connections quick and easy
- 3-point mounting pattern speeds installation and simplifies ganging in close quarters
- Clear line shield allows visual verification of blade position while guarding against accidental contact with live parts
- Accessories, such as auxiliary switch kits, are UL Listed for quick and easy field installation (or they may be factory installed)
- Plated blades provide visible confirmation of contact position
- Direct drive, quick-make, quick-break mechanism "snaps" the contacts open and closed, providing positive On/Off indication while prolonging switch life
- Spring reinforced fuse clips assure reliable contact for cool operation, suitable for Class H, K, J or R fuses
- Cu/Al lugs are 60/75 deg C rated to permit greater wire selection
- Galvanized steel enclosure offers superior rust protection in outdoor applications, there's also a durable polyester powder coated finish
- Designed for commercial and industrial applications where safety, high performance and continuity of service are essential
- Suitable for use as service equipment when installed in accordance with the Canadian Electrical Code®
- Full cover interlocks
- Dead front switches
- 50 hp at 240 VAC 3 ph NEC standard, 125 hp at 240 VAC 3 ph time delay, 100 hp at 480 VAC 3 ph NEC standard, 250 hp at 480 VAC 3 ph time delay, 125 hp at 600 VAC 3 ph NEC standard, 350 hp at 600 VAC 3 ph time delay, 50 hp at 250 VDC horsepower rating
Specifications
- Actuator TypeDonut Handle
- Amperage Rating400 A
- Dimensions22.9 in W x 8.3 in D x 53.9 in H
- Enclosure TypeNEMA 1
- Frequency Rating50/60 Hz
- Horsepower50 hp, 125 hp, 350 hp
- Insulation TypeClass J/R
- MaterialStainless Steel
- Mounting Type3/4-Point Welded Bracket
- Number of Poles3
- Number of Wires4
- Phase3 Ph
- SeriesTH
- Short Circuit Current Rating200 kA
- Temperature Rating60 to 75 deg C
- Terminal TypeLine/Load Lug
- TypeDust-Tight Fused Heavy Duty
- Voltage Rating600 VAC, 125/250 VDC