Thomas & Betts

Copper Galvanized Ground Plate for Wire Range #8 Sol. - 1/0 Str. with JAB58H connectorFeaturesAs efficient as two 10-ft. x 5/8 ground rods. 1/4 inch thick, hot dipped galvanized.GeneralStyle Galvanized PlateMaterial GalvanizedWire Range #8 Sol. - 1/0..

Watertight fitting made of malleable iron with a hub thread size of 1/2 in. Cable Jacket O.D. is 0.562 to 0.625 in.General - Type: 10464 Series Watertight Fittings / ACWU - Application: Hazardous location - Material: Malleable iron Dimension Informat..

Watertight fitting made of malleable iron with a hub thread size of 1/2 in. Cable Jacket O.D. is 0.625 to 0.76 in.General - Type: 10464 Series Watertight Fittings / ACWU - Application: Hazardous location - Material: Malleable iron Dimension Informati..

Watertight fitting made of malleable iron with a hub thread size of 1/2 in. Cable Jacket O.D. is 0.875 to 0.985 in.General - Type: 10464 Series Watertight Fittings / ACWU - Application: Hazardous location - Material: Malleable iron Dimension Informat..

Watertight fitting made of malleable iron with a hub thread size of 3/4 in. Cable Jacket O.D. is 0.88 to 1.065 in.General - Type: 10464 Series Watertight Fittings / ACWU - Application: Hazardous location - Material: Malleable iron Dimension Informati..

Watertight fitting made of malleable iron with a hub thread size of 3/4 in. Cable Jacket O.D. is 1.055 to 1.205 in.General - Type: 10464 Series Watertight Fittings / ACWU - Application: Hazardous location - Material: Malleable iron Dimension Informat..

Watertight fitting made of malleable iron with a hub thread size of 1 in. Cable Jacket O.D. is 1.187 to 1.375 in.General - Type: 10464 Series Watertight Fittings / ACWU - Application: Hazardous location - Material: Malleable iron Dimension Informatio..

Watertight fitting made of malleable iron with a hub thread size of 1-1/4 in. Cable Jacket O.D. is 1.375 to 1.625 in.General - Type: 10464 Series Watertight Fittings / ACWU - Application: Hazardous location - Material: Malleable iron Dimension Inform..

Watertight fitting made of malleable iron with a hub thread size of 2 in. Cable Jacket O.D. is 2.156 to 2.36 in.General - Type: 10464 Series Watertight Fittings / ACWU - Application: Hazardous location - Material: Malleable iron Dimension Information..

1/2 in. Bonding Locknut, Hardened Steel. For use with Rigid/IMC Conduit.ApplicationTo connect externally threaded conduit or connector to a threadless opening in a box or enclosure. To effectively bond conduit or connector to box or enclosure.General..

1/2 in.-3/4 in. Male Enlarger, Malleable Iron. For use with Rigid/IMC Conduit.FeaturesAdapt an outlet hole to the next larger size of conduit. Rough ends of conduit carefully covered by built-in bushing.ApplicationSuitable for use in hazardous locati..

3/4 - 1/2 Female Reducer, Malleable Iron. For use with Rigid/IMC Conduit.FeaturesAdapt any outlet to the next smaller size of conduit. Hex shoulder makes wrench tightening convienient.ApplicationSuitable for use in hazardous locations where general p..