Weidmuller 1122850000 Solid State Relay, 28 mA/6 A, SPDT Contact

• 24 to 230 VAC UC +/- 10% rated control voltage
• 13 V/8 VAC and 13 V/5 VDC pull-in/drop-out voltage, typical, 28 mA/11.5 mA AC and 22 mA/6.5 mA DC pull-in/drop-out current, typical
• Green LED status indicator, rectifier protective circuit, coil voltage of the replacement relay deviating from the rated control voltage, 24 VDC coil voltage of the replacement relay
• 250 VAC/VDC rated switching voltage, 20 A/20 ms inrush current
• 4 mA at 230 VAC +/-10%, 28 mA at 24 VAC +/-10% rated current AC, 22 mA at 24 VDC +/-10% rated current DC, 6 A continuous current
• <=30 ms switch-on delay, <140 ms switch-off delay, 1 mA at 24 VAC, 10 mA at 12 VAC, 100 mA at 5 VAC minimum switching power
• 1 CO contact (AgNi), 5 x 10^6 switching cycles mechanical service life
• 300 VAC rated voltage, >=5.5 mm creepage and clearance distance input output, 4 kVeff/1 min dielectric strength input output, 4 kVeff/1 min dielectric strength to mounting rail, 1 kVeff/1 min dielectric strength of open contact, 6 kV (1.2/50 us) impulse withstand voltage
• IP20 protection degree, 2 pollution severity, III surge voltage category
• 8 mm stripping length, rated connection
• Size PH0 blade
• A1, B1 gauge to IEC 60947-1
• Rigid copper conductor, flexible copper conductor
• -40 to 85 deg C storage temperature
• 0.1 Hz maximum switching frequency at rated load
• 1500 VA AC switching capacity (resistive) maximum, 144 W at 24 VDC switching capacity (resistive) maximum
• UL 94 flammability rating V-0
• 530 mW at 24 VDC, 930 mVA at 230 VAC power rating
• TRS 24-230VUC 1CO type
• 0.4 Nm tightening torque

Could not find any documents for this product